LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2009 >> Tucson AWD L4-2.0L >> Repair and Diagnosis >> Heating and Air Conditioning >> Control Assembly >> Testing and Inspection >> Component Tests and General Diagnostics >> Heater & A/C Control Unit(Manual) >> Temp Check

Temp Check





Check Point By Type

Temp.check




As shown in the above figure, in adjusting temp. switch from WARM to COOL, 0V is outputted from temp. connector B7, 12V is supplied for B8 and temp. motor works in direction of COOL. In adjusting temp. switch from COOL to WARM, 0V is outputted from temp. connector B8, 12V is supplied for B7 and temp. motor works in direction of WARM. When temp. actuator has to move to a certain location for its automatic control, temp. feedback signal terminal moves equally in temp. actuator and informs controller of location of temp. actuator through temp. connector B9. Comparing original value with the inputted value, it works until they are same
Troubleshooting