LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2009 >> Tucson AWD L4-2.0L >> Repair and Diagnosis >> Brakes and Traction Control >> Parking Brake System >> Service and Repair

Parking Brake System: Service and Repair





Removal

NOTE:
The parking brake cables must not be bent or distorted.
This will lead to stiff operation and premature failure.

1. Remove the floor console.
2. Loosen the adjusting nut (A) and the parking brake cables.




3. Disconnect the connector(A) of the parking brake switch.




4. Remove the 4 bolts and parking brake lever assembly(A).
5. Remove the wheel and tire.
6. Remove the brake disc.
7. Remove the parking brake cable(A) from the brake shoe.




8. Remove the parking brake cable retaining ring (B), from the parking brake cable (A).






Installation

1. Install the removed parts in the reverse order of removal.
2. Apply the specified grease to each sliding parts of the ratchet plate or the ratchet pawl.

Specified grease :
Multi purpose grease SAE J310, NLGI No.2


3. After installing the parking brake cable adjuster, adjust the parking brake lever stroke .