LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2009 >> Tucson AWD L4-2.0L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Testing and Inspection >> Scan Tool Testing and Procedures >> Hi-Scan (Pro) Check

Hi-Scan (Pro) Check





Hi-scan (Pro) Check
1. Turn the ignition switch OFF.
2. Connector the Hi-scan (pro) to the 16P data link connector located the driver's side kick panel.




3. Turn the ignition switch ON.
4. Check for diagnostic trouble using the Hi-scan(pro).
5. After completion trouble of the repair or correction of the problem, erase the stored fault codes the clear key on the Hi-scan(pro).
6. Disconnect the Hi-scan (pro) from the 16P date link connector.