LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2009 >> Tucson AWD L4-2.0L >> Repair and Diagnosis >> Body and Frame >> Seats >> Seat Temperature Switch >> Testing and Inspection

Seat Temperature Switch: Testing and Inspection





Inspection

1. Disconnect the negative (-) battery terminal.
2. Remove the seat warmer switch from the floor console upper cover.




3. Check for continuity between the terminals.





Seat Warmer Inspection
1. Check for continuity and measure the resistance between the terminals.

Standard value :2.6Ohms ± 10%





2. Operate the seat warmer after connecting the 2P connector and then check for the thermostat by measuring the temperature of seat surface.
3. Check for continuity between the terminals after disconnecting the 2P connector.

Thermostat settings standard value
28 ± 3.5°C (Continuity) : Turn ON
37 ± 3.0°C (Short) : Turn OFF