Component Inspection
- Ignition "OFF"
- Disconnect PCSV connector
- Measure resistance between terminals 1 and 2 of the PCSV connector (Component side)RESISTANCE AND TEMPERATURE SPECIFICATIONS
Temp.(°C) Temp.(°F) PCSV Resistance (Ω) 20 68 Approx. 16 - Is resistance within the specification?
YES
- Go to next step as below.
NO
- Check PCSV for contamination, deterioration, or damage. Substitute with a known-good PCSV and check for proper operation. If the problem is corrected, replace PCSV and then go to "VERIFICATION OF VEHICLE REPAIR " procedure