LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2008 >> Elantra GLS, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel System (G4GC-GSL 2.0) >> DTC Troubleshooting Procedures >> DTC P0335 Crankshaft Position Sensor A Circuit >> Power Circuit Inspection

Power Circuit Inspection

  1. Ignition "OFF"
  2. Disconnect CKP sensor connector
  3. Ignition "ON" & Engine "OFF"
  4. Measure voltage between terminal 1 of the sensor harness connector and chassis ground

    Specification : Approx. B+

  5. Is voltage within the specification?

    YES 

    NO 

    • Check for a open in the power supply circuit between the main relay and the CKPS
    • Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure