LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2007 >> Tucson SE, 4WD >> Repair and Diagnosis >> Transmission >> Transfer Case Assembly >> DTC Troubleshooting Procedure >> DTC P1750 Wheel Speed Sensor Signal (Fl) >> Visual/Physical Inspection

Visual/Physical Inspection

  1. FLSS Air Gap Inspection
    1. IG KEY: OFF, Engine: OFF.
    2. 4WD ECM connector and FLSS connector: Disconnect.
    3. Measure air gap between wheel speed sensor and rotor.

      Specification: Front Air-gap: 0.3~0.9 mm (0.0118 ~ 0.0354 inch)

      Is the air gap in the range of the specified value?

      YES  : --> Replace with normal 4WD ECM temporarily and check if vehicle runs normally. If trouble disappears, replace 4WD ECM.

      --> If problem is solved, go to the "VERIFICATION OF VEHICLE REPAIR ".

      NO  : --> Adjust the air gap.

      --> If problem is solved, go to the "VERIFICATION OF VEHICLE REPAIR ".