LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2007 >> Tucson SE, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel System (G6BA - GSL 2.7) >> DTC Troubleshooting Procedures >> DTC U0101 Serial Communication Problem With TCU (Timeout) >> Signal Circuit Inspection >> Check Can Communication Line For Short To Ground

Check Can Communication Line For Short To Ground

  1. Measure resistance between terminal 36 of the ECM harness connector and chassis ground
  2. Measure resistance between terminal 37 of the ECM harness connector and chassis ground.

    Specification: Infinite (above 10kΩ)

    Fig 1: Measuring Resistance Between Terminal 36 Of ECM Harness Connector And Chassis Ground
    G04810177Courtesy of HYUNDAI MOTOR CO.
  3. Is resistance within the specification?

    YES  : --> Go to next step as below.

    NO  : --> Repair CAN communication line for a short to ground. And then go to "VERIFICATION OF VEHICLE REPAIR " procedure.