LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2007 >> Tucson SE, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel System (G6BA - GSL 2.7) >> DTC Troubleshooting Procedures >> DTC P0463 Fuel Level Sensor "A" Circuit High Input >> Ground Circuit Inspection

Ground Circuit Inspection

  1. Ignition "OFF"
  2. Disconnect FLS and ECM connector
  3. Measure resistance between terminals 1 of the FLS harness connector and 15 of the ECM harness connector

    Specification: Approx. 0Ω

    Fig 1: Measuring Resistance Between Terminals 1 FLS Harness Connector And 15 ECM Harness Connector
    G04810499Courtesy of HYUNDAI MOTOR CO.
  4. Is resistance within the specification?

    YES  : --> Go to "SIGNAL CIRCUIT INSPECTION " procedure.

    NO  : --> Check for a open/short circuit. Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.