Outside Handle Replacement
NOTE:
Put on gloves to protect your hands.
- Remove the following parts.
- Door trim (See FRONT DOOR TRIM ).
- Glass trim (See GLASS REPLACEMENT ).
- Rear channel (See REAR CHANNEL REPLACEMENT ).
- Disconnect the outside handle rod (A) and lock rod (B).
- After removing the outside handle mounting bolt, remove the outside handle base (C) and key cylinder.
- After removing the key cylinder (A) and outside handle base (B), remove the outside handle lever (C).
- Installation is the reverse of removal.
- Make sure the connector is plugged in properly, and each rod is connected securely.
- Make sure the door locks and opens properly.