LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2007 >> Tucson SE, 4WD >> Repair and Diagnosis >> Body & Frame >> Windows >> Exterior >> Front Door >> Replacement >> Inside Handle Replacement

Inside Handle Replacement

  1. Remove the front door trim (See FRONT DOOR TRIM ).
  2. Loosen the inside handle (A) mounting screw.

    Push the inside handle forward to disconnect from the door module.

    Fig 1: Identifying Inside Handle Mounting Screw
    G03764205Courtesy of HYUNDAI MOTOR CO.
  3. Disconnect the lock cable and (A) inside handle connect cable (B).
    Fig 2: Identifying Lock Cable And Inside Handle Connect Cable
    G03764206Courtesy of HYUNDAI MOTOR CO.
  4. Installation is the reverse of removal
    NOTE: Make sure the door locks and opens properly.