LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2007 >> Tucson Limited, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel System (G6BA - GSL 2.7) >> DTC Troubleshooting Procedures >> DTC P0150 Ho2S Circuit (Bank 2/Sensor 1) >> Signal Circuit Inspection

Signal Circuit Inspection

  1. Measure resistance between terminals 1 of the HO2S harness connector and 15 of the ECM harness connector.

    Specification: Approx. 0Ω

    Fig 1: Measuring Resistance Between HO2S Harness Connector And ECM Harness Connector
    G04810337Courtesy of HYUNDAI MOTOR CO.
  2. Is resistance within the specification?

    YES  : --> Go to "COMPONENT INSPECTION " procedure.

    NO  : --> Repair open in the signal circuit and go to "VERIFICATION OF VEHICLE REPAIR " procedure.