Transfer Case: Removal: [2.0L]
- Remove the battery (-) terminal.
- Lift up the vehicle.
- Remove the propeller shaft (See PROPELLER SHAFT ).
- Remove the front muffler (A).
- Remove the RH driveshaft (See FRONT DRIVESHAFT ASSEMBLY ).
- Loosen the oil drain plug and drain the fluid.
- After draining, re-tighten the oil drain plug.
TORQUE: 39.2~58.8 Nm (400~600 kgf.cm, 28.9~43.4 lb-ft)
- Support the transfer assembly with a jack.
- Remove the transfer assembly by loosening the mounting bolts.CAUTION: Remove the transfer bracket mounting bolts (2EA) together.