Component Inspection
- IG KEY: OFF, Engine: OFF
- 4WD ECM connector and FRSS connector: Disconnect.
- Measure resistance between terminal 1 & 2 of FRSS harness connector.
Specification: Approx. 1.1 ± 0.05 kΩ
NOTE: The above value is just for reference. The data from vehicle may differ from it according to various vehicle condition. This inspection is for checking open or short of FRSS.Is resistance display near the specified value?
YES : --> Proceed to next inspection procedure.
NO : --> Replace the front left speed sensor.
--> If problem is solved, go to the "VERIFICATION OF VEHICLE REPAIR ".