LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2007 >> Tucson GLS, 4WD >> Repair and Diagnosis >> Transmission >> Transfer Case Assembly >> DTC Troubleshooting Procedure >> DTC P1717 Steering Wheel Angle Sensor 1-Input Signal >> Ground Circuit Inspection

Ground Circuit Inspection

  1. Ground Circuit Inspection
    1. IG KEY OFF, ENG OFF
    2. Sensor connector (M14): Disconnect.
    3. Measure resistance between terminal 3 of Steering angle sensor harness connector M14 and chassis ground.

      Specification: Approx. 1Ω below.

      Is resistance display near the specified value?

      YES  : --> Proceed to next inspection procedure.

      NO  : --> Repair open circuit of Steering angle sensor harness.

      --> If problem is solved, go to the "VERIFICATION OF VEHICLE REPAIR ".

      Fig 1: Open Circuit Of Steering Angle Sensor Harness - Steering Angle Sensor Circuit Diagram
      G04811001Courtesy of HYUNDAI MOTOR CO.