LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2007 >> Tiburon GS, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel System (G4GC-GSL 2.0L) >> DTC Troubleshooting Procedures >> U0001 Can Communication Malfunction >> Monitor DTC Status

Monitor DTC Status

  1. Connect scan tool and select "Diagnostic Trouble Codes(DTCs)" mode.
  2. Press F4(DTAL) to select DTC information from the DTCs menu.
  3. Confirm that DTC Readiness Flag" indicates "Complete". If not, drive the vehicle within conditions noted in the freeze frame data or enable conditions.
  4. Read "DTC Status" parameter.
    Fig 1: Monitor DTC Status
    G03849330Courtesy of HYUNDAI MOTOR CO.
  5. Is parameter displayed History(Not present) fault"?
    NOTE:
    1. History (Not Present) fault: DTC occurred but has been cleared.
    2. Present fault: DTC is occurring at present time.

    YES: 

    • Fault is intermittent caused by poor contact in the sensor(s) and/or the PCM's connector was repaired and PCM memory was not cleared. Throughly check connectors for loose or poor connections, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO: 

    • Go to next step as below.