LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2007 >> Tiburon GS, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel System (G4GC-GSL 2.0L) >> DTC Troubleshooting Procedures >> U0001 Can Communication Malfunction >> Can High Line Inspection

Can High Line Inspection

  1. Check for Open in harness.

    [With ABS]

    1. Ignition "OFF".
    2. Measure resistance between terminals 7 of the PCM harness connectors and 7 of the ESC control module harness connector.

      Specification: Approx. 0Ω

      Fig 1: Measuring Resistance Between Terminals 7 Of PCM Harness Connectors And 7 Of ESC Control Module Harness Connector
      G00455238Courtesy of HYUNDAI MOTOR CO.
    3. Is resistance within the specification?

      YES: 

      • Go to step  2

      NO: 

    4. [Without ESC]

    5. Measure resistance between terminals 7 of the PCM harness connectors and 2 of the vertical resistor.

      Specification: Approx. 0Ω

      Fig 2: Measuring Resistance Between Terminals 7 Of PCM Harness Connectors And 2 Of Vertical Resistor
      G00455239Courtesy of HYUNDAI MOTOR CO.
    6. Is resistance within the specification?

      YES: 

      • Go to  2.

      NO: 

  2. Check for short to ground in harness.
    1. Measure resistance between terminals 7 of the PCM harness connectors and chassis ground.

      Specification: Infinite

      Fig 3: Measuring Resistance Between Terminals 7 Of PCM Harness Connectors And Chassis Ground
      G03849316
    2. Is resistance within the specification?

      YES: 

      • Go to next step

      NO: 

  3. Check for short to battery in harness.
    1. Ignition "ON" & Engine "OFF".
    2. Measure resistance between terminals 7 of the PCM harness connectors and chassis ground

      Specification: Approx. 0V

      Fig 4: Measuring Resistance Between Terminals PCM Harness Connectors And Chassis Ground
      G03849316
    3. Is voltage within the specification?

      YES: 

      NO: