TPS Inspection
- Ignition "ON" & Engine "OFF".
- Install Scan tool and monitor the "THROTTLE P.SENSOR (V)" parameter on the Scan tool data list.
Specification: Approx. 0.25~0.80V (Closed throttle Valve)/Approx 4.0~4.4V (Wide Open Throttle)
- Is "THROTTLE P.SENSOR (V)" within specification?
YES:
- Go to "TERMINAL AND CONNECTOR INSPECTION " procedure.
NO:
- Inspect TP sensor and W/harness and repair or replace as necessary. Go to "VERIFICATION OF VEHICLE REPAIR " procedure