Fuel Pump (FP): Removal
- Preparation
- Open the Service Cover (A) with unscrewing the bolts (B).
- Disconnect the Fuel Pump Connector (A).
- Start the engine and wait until fuel in fuel line is exhausted.
- After the engine stalls, turn the ignition switch to OFF position.
- Disconnect the Fuel Feed Line (A), Recirculation Line (B) and Fuel Tank Pressure Sensor connector (C).
- Unfasten the Fuel Pump Locking Ring (D) with the Special Service Tool (Refer to "SPECIAL SERVICE TOOL ").CAUTION: Be careful NOT TO damage the surface of the fuel rank.
- Remove the Fuel Pump assembly from the Fuel Tank.