LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2007 >> Santa Fe SE, AWD >> Repair and Diagnosis >> Transmission >> Automatic Transaxle System (A5HF1) >> Automatic Transaxle System >> Automatic Transaxle >> Removal

Automatic Transaxle: Removal

CAUTION:
  • Use a cover not to damage the vehicle surface.
  • Disconnect connectors carefully not to be damaged.
NOTE:
  • Mark wires or hoses for identification.
  1. Remove the engine cover, (see CHARGING SYSTEM (ENGINE ELECTRICAL SYSTEM (G6EA-GSL 2.7)) )
  2. Remove the battery (A).
    Fig 1: Identifying Battery
    G05348500Courtesy of HYUNDAI MOTOR CO.
  3. Disconnect the AFS connector (A).
    Fig 2: Identifying AFS Connector
    G05348724Courtesy of HYUNDAI MOTOR CO.
  4. Remove the air cleaner assembly (B) by loosening the clamp bolt (C) and the clips and removing the two mounting bolts (D).
  5. Remove the battery tray (B) by removing the four mounting bolts (A-4ea).
    Fig 3: Identifying Battery Tray And Mounting Bolts
    G05348505Courtesy of HYUNDAI MOTOR CO.
  6. Remove the ECM (A).
    Fig 4: Identifying ECM
    G05348726Courtesy of HYUNDAI MOTOR CO.
  7. Remove the inhibitor switch connector (A).
    Fig 5: Identifying Inhibitor Switch Connector
    G05348506Courtesy of HYUNDAI MOTOR CO.
  8. Remove the solenoid valve connector (A).
    Fig 6: Identifying Solenoid Valve Connector
    G05348507Courtesy of HYUNDAI MOTOR CO.
  9. Remove the input speed sensor connector (A).
    Fig 7: Identifying Input Speed Sensor Connector
    G05348508Courtesy of HYUNDAI MOTOR CO.
  10. Remove the output speed sensor connector (A).
    Fig 8: Identifying Output Speed Sensor Connector
    G05348730Courtesy of HYUNDAI MOTOR CO.
  11. Remove the vehicle speed sensor connector (A).
    Fig 9: Identifying Vehicle Speed Sensor Connector
    G05348510Courtesy of HYUNDAI MOTOR CO.
  12. Remove the control cable assembly (C) by removing the nut (A) and clip (B).
    Fig 10: Identifying Control Cable Assembly, Nut And Clip
    G05348511Courtesy of HYUNDAI MOTOR CO.
  13. Disconnect the transaxle oil cooler hoses (B) from the tubes by loosening the clamps (A).
    Fig 11: Identifying Transaxle Oil Cooler Hoses And Clamps
    G05348733Courtesy of HYUNDAI MOTOR CO.
  14. Remove the CKP sensor connector (A).
    Fig 12: Identifying CKP Sensor Connector
    G05348734Courtesy of HYUNDAI MOTOR CO.
  15. Remove the transaxle mounting bolts (A-3ea).
    Fig 13: Identifying Transaxle Mounting Bolts
    G05348735Courtesy of HYUNDAI MOTOR CO.
  16. Using the special tool (09200-38001), hold the engine and transaxle assembly safely.
    Fig 14: Identifying Special Tool (09200-38001)
    G05348736Courtesy of HYUNDAI MOTOR CO.
  17. Remove the transaxle insulator mounting bolts (A-4ea).
    Fig 15: Identifying Transaxle Insulator Mounting Bolts
    G05348737Courtesy of HYUNDAI MOTOR CO.
  18. Remove the front wheels, (see FRONT SUSPENSION SYSTEM )
  19. Lift up the vehicle.
  20. Remove the power steering column joint bolt and the EPS connector, (see GENERAL (STEERING SYSTEM) )
  21. Remove the under cover (A).
    Fig 16: Identifying Under Cover
    G05348738Courtesy of HYUNDAI MOTOR CO.
  22. Drain the transaxle fluid by removing the oil drain plug (A).
    Fig 17: Identifying Oil Drain Plug
    G05348739Courtesy of HYUNDAI MOTOR CO.
  23. Drain power steering fluid through the return tube (A). (see GENERAL (STEERING SYSTEM) )
    Fig 18: Identifying Return Tube
    G05348517Courtesy of HYUNDAI MOTOR CO.
  24. Disconnect the power steering pressure tube (A) from the power steering oil pump.
    Fig 19: Identifying Power Steering Pressure Tube And Power Steering Oil Pump
    G05348741Courtesy of HYUNDAI MOTOR CO.
  25. Disconnect the lower arm, the tie rod end ball joint, the stabilizer bar link from the front knuckle, (see FRONT SUSPENSION SYSTEM )
  26. Remove the roll stopper mounting bolts (A-3ea, B-3ea).
    Fig 20: Identifying Roll Stopper Mounting Bolts
    G05348742Courtesy of HYUNDAI MOTOR CO.
    Fig 21: Identifying Roll Stopper Mounting Bolts
    G05348743Courtesy of HYUNDAI MOTOR CO.
  27. Remove the muffler hanger rubber (A).
    Fig 22: Identifying Muffler Hanger Rubber
    G05348744Courtesy of HYUNDAI MOTOR CO.
  28. Remove the mounting bolts from the sub frame by supporting the sub frame by using the special tool (09624-38000). (see FRONT SUSPENSION SYSTEM )
    Fig 23: Identifying Special Tool (09624-38000)
    G05348745Courtesy of HYUNDAI MOTOR CO.
  29. Remove the front roll support (A) from the transaxle.
    Fig 24: Identifying Front Roll Support And Transaxle
    G05348746Courtesy of HYUNDAI MOTOR CO.
  30. Remove the front muffler assembly (A).
    Fig 25: Identifying Front Muffler Assembly
    G05348747Courtesy of HYUNDAI MOTOR CO.
  31. Remove the inner shaft bracket bolts (A-3ea).
    Fig 26: Identifying Inner Shaft Bracket Bolts
    G05348748Courtesy of HYUNDAI MOTOR CO.
  32. Remove drive shaft (A, B) from transaxle. (see DRIVESHAFT ).
    Fig 27: Identifying Drive Shaft To Transaxle
    G05348749Courtesy of HYUNDAI MOTOR CO.
    Fig 28: Identifying Drive Shaft To Transaxle
    G05348750Courtesy of HYUNDAI MOTOR CO.
  33. Install a jack for supporting the transaxle assembly.
  34. In case of 4WD, remove the transfer case assembly, (see MANUAL TRANSAXLE (M5GF2) 'TRANSFER CASE ')
  35. Remove the left side cover (A).
    Fig 29: Identifying left side cover
    G05348751Courtesy of HYUNDAI MOTOR CO.
  36. Remove the ground (A).
    Fig 30: Identifying Ground
    G05348752Courtesy of HYUNDAI MOTOR CO.
  37. Remove the starter motor mounting bolts (A) and the two bolts (B).
    Fig 31: Identifying Starter Motor Mounting Bolts And Bolts
    G05348753Courtesy of HYUNDAI MOTOR CO.
  38. Remove the cover (A).
    Fig 32: Identifying Cover
    G05348754Courtesy of HYUNDAI MOTOR CO.
  39. Remove the drive plate bolts (A) and the transaxle lower mounting bolts (B-6ea).
    Fig 33: Identifying Drive Plate Bolts And Transaxle Lower Mounting Bolts
    G05348755Courtesy of HYUNDAI MOTOR CO.
  40. Lifting the vehicle up and lowering the jack slowly, remove the transaxle assembly.