LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2007 >> Santa Fe SE, AWD >> Repair and Diagnosis >> Transmission >> Automatic Transaxle System (A5HF1) >> Automatic Transaxle Control System >> VFS (Variable Force Solenoid) Valve >> Installation

VFS (Variable Force Solenoid) Valve: Installation

  1. Install the solenoid valve (A).
    CAUTION: Apply the ATF oil or White Vaseline to the O-ring not to be damaged.
    Fig 1: Identifying Solenoid Valve Assembly
    G05348801Courtesy of HYUNDAI MOTOR CO.
  2. Connect the solenoid valve connector to the valve body.
    CAUTION: When connecting the solenoid valve connector, check the connector for rust, dirt, or oil, then reconnect it.
  3. Install the VFS reservoir (A).
    Fig 2: Identifying VFS Reservoir
    G05348800Courtesy of HYUNDAI MOTOR CO.
  4. Continue to apply liquid gasket at application points at the oil pan with ø2.5mm (0.098in) thickness.

    Liquid gasket Part name : Threebond 1281B

    Fig 3: Identifying Oil Pan Gasket Area
    G05348796Courtesy of HYUNDAI MOTOR CO.
  5. Tighten the mounting bolt with the specified torque after installing the oil pan.

    TORQUE :

    10~12Nm (1.0~1.2kgf.m, 7~8lb-ft)

  6. Install the drain plug and refill the transaxle fluid.

    TORQUE :

    35~45Nm (3.5~4.5kgf.m, 25~32lb-ft)

  7. Install the splash shield.
  8. Lower the vehicle and install the battery terminal.