LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2007 >> Entourage GLS >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Immobilizer Control System >> Immobilize Control System >> DTC P1690 SMARTRA No Response >> Ground Circuit Inspection

Ground Circuit Inspection

  1. Check for open in ground harness
    1. Ignition "OFF"
    2. Disconnect SMARTRA.
    3. Measure resistance between terminal "3" of SMARTRA and chassis ground.

      Specification : 1 Ω or less

      Fig 1: Measuring Resistance Between Terminal "3" Of SMARTRA And Chassis Ground
      G05325523Courtesy of HYUNDAI MOTOR CO.
    4. Is the measured resistance within specifications?

      YES 

      Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

      NO 

      Check for open in harness. Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.