LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2006 >> Tiburon V6-2.7L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Shift Linkage >> Service and Repair >> Installation

Installation

INSTALLATION





PROCEDURE TO INSTALL THE LOCK CAM
1. Move A/T lever to "P" position to set the key lock cam and the shift lock cam as shown in the figure.
1. Check that the key lock cam is located at "B" by the detent pin.





2. Check that the shift lock cam is located at "A".
2. Check that the key cylinder is at "LOCK".