LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2005 >> Tiburon GT, Automatic >> Repair and Diagnosis >> Engine Performance >> Fuel System (G6BA-GSL 2.7L) >> DTC Troubleshooting Procedures >> DTC P0315 Segment Time Acquisition Incorrect >> Monitor DTC Status

Monitor DTC Status

NOTE: If any codes relating to CKPs are stored, do ALL REPAIRS associated with those codes before proceeding with troubleshooting.
  1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode.
  2. Press F4 (DTAL) to select DTC information from the DTCs menu.
  3. Confirm that "DTC Readiness Flag" indicates "Complete". If not, drive the vehicle within conditions noted in the freeze frame data or enable conditions.
  4. Read "DTC Status" parameter.
    Fig 1: Confirming "DTC Readiness Flag" Indicates "Complete"
    G03849527Courtesy of HYUNDAI MOTOR CO.
  5. Is parameter displayed "History (Not Present) fault"?
    • History (Not Present) fault: DTC occurred but has been cleared.
    • Present fault: DTC is occurring at present time.

    YES: 

    • Fault is intermittent caused by poor contact in the sensor's and/or ECM's connector or was repaired and ECM memory was not cleared. Thoroughly check connectors for loose or poor connections, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and go to "VERIFICATION OF VEHICLE REPAIR  " procedure.

    NO: