LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2005 >> Tiburon GT, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel System (G6BA-GSL 2.7L) >> DTC Troubleshooting Procedures >> DTC P0102 Mass Or Volume Air Flow Circuit Low Input >> Signal Circuit Inspection

Signal Circuit Inspection

  1. Check for open in signal harness.
    1. Ignition "OFF".
    2. Disconnect ECM connector.
    3. Measure resistance between terminals 2 of the MAF sensor harness connector and 1 of the ECM harness connector

      Specification: Approx. 0ohm

    4. Is resistance within the specification?

      YES: 

      • Go to step  2 .

      NO: 

  2. Check for short to ground in signal harness.
    1. Ignition "OFF".
    2. Measure resistance between terminal 2 of the MAF sensor harness connector and chassis ground

      Specification: infinite

    3. Is resistance within the specification?

      YES: 

      NO: