Ignition Coil Inspection
- Ignition "OFF"
- Ignition coil connector: Disconnect.
- Visually/physically inspect the following items:
- Damage, cracks and flashover
- Measure the primary coil resistance between terminals 1, 3 and 2, 3
SPECIFICATION
IGNITION COIL TEMPERATURE REFERENCETemp. (°C) Temp. (°F) Ignition Primary Coil (ohm) 20 68 Approx. 0.52~0.64ohm - Is resistance within the specified value?
YES:
- Go to "TIMING INSPECTION " procedure.
NO:
- Replace as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.