LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2005 >> Tiburon GS, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel System (G4GC-GSL 2.0L) >> DTC Troubleshooting Procedures >> DTC P0102 Mass Or Volume Air Flow Circuit Low Input >> Signal Circuit Inspection

Signal Circuit Inspection

  1. Check for open in signal harness.
    1. Ignition "OFF".
    2. Disconnect PCM connector.
    3. Measure resistance between terminals 3 of sensor harness connector and 60 of the PCM harness connector.

      Specification: Approx. 0ohm

    4. Is resistance within the specification?

      YES: 

      • Go to next step below

      NO: 

  2. Check for short to ground in signal harness.
    1. Measure resistance between terminal 3 of sensor harness connector and chassis ground.

      Specification: Infinite

    2. Is resistance within the specification?

      YES: 

      NO: