LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2005 >> Tiburon GS, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel System (G4GC-GSL 2.0L) >> DTC Troubleshooting Procedures >> DTC P0030 Ho2S Heater Control Circuit (Bank 1/Sensor 1) >> Power Supply Circuit Inspection

Power Supply Circuit Inspection

  1. Ignition "OFF".
  2. Disconnect HO2S connector.
  3. Ignition "ON" & Engine "OFF"
  4. Measure voltage between terminal 4 of the HO2S heater harness connector and chassis ground.

    Specification: B+

  5. Is voltage display near the specified value?

    YES: 

    NO: 

    • Check for an open in the power supply circuit between the main relay and the HO2S

      Especially check for "10A Sensor fuse" is installed and not blown.

      Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR  " procedure.