LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2005 >> Tiburon GS, Standard >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine (G4GC-GSL 2.0L) >> Cooling System >> Engine Coolant Refilling And Bleeding >> Cap Testing >> Notes

Cap Testing: Notes

  1. Remove the radiator cap, wet its seal with engine coolant, then install the no pressure tester.
    Fig 1: Installing No Pressure Tester
    G03848770Courtesy of HYUNDAI MOTOR CO.
  2. Apply a pressure of 93 ~ 123kPa (0.95 ~ 1.25kgf/cm2 , 14 ~ 19psi)
  3. Check for a drop in pressure.
  4. If the pressure drops, replace the cap.