LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2005 >> Tiburon GS, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Abs (Anti-Lock Brake System) >> Anti-Lock Braking System Wheel Speed Sensor >> Inspection

Anti-Lock Braking System Wheel Speed Sensor: Inspection

  1. Measure the output voltage between the terminal of the wheel speed sensor and the body ground.
    CAUTION: In order to protect the wheel speed sensor, when measuring output voltage, a 1000. resister must be used as shown.
    Fig 1: Measuring Output Voltage Between Terminal Of Wheel Speed Sensor And Body Ground
    G03850412Courtesy of HYUNDAI MOTOR CO.
  2. Compare the change of the output voltage of the wheel speed sensor to the normal change of the output voltage as shown below.
    Fig 2: Comparing Change Of Output Voltage Of Wheel Speed Sensor To Normal Change Of Output Voltage
    G03850413Courtesy of HYUNDAI MOTOR CO.
    • V_low: 590mV ~ 840mV
    • V_high: 1.18V ~ 1.68V
    • Frequency range: 1~2,000Hz