NORMAL BRAKING without ABS
SOLENOID VALVE SPECIFICATION
| Solenoid valve | State | Valve | Passage | Pump motor |
|---|---|---|---|---|
| Inlet valve (NO) | OFF | OPEN | Master cylinder - Wheel cylinder | OFF |
| Outlet valve (NC) | OFF | CLOSE | Wheel cylinder - Reservoir |
When braking, the hydraulic pressure in the TMC is increased. The pressure reaches the wheel brake via the current less open inlet valve IV. The current less closed outlet valve 0V is closed. For the sake of simplicity the diagram is limited to only the solenoid valve pair of one brake circuit. The wheel speed is reduced as the brake pressure increases, in the extreme case until the wheel locks.