LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2005 >> Santa Fe V6-2.7L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Acceleration/Deceleration Sensor >> Service and Repair

Acceleration/Deceleration Sensor: Service and Repair

G SENSOR





COMPONENTS [ONLY 4WD]

INSPECTION
1. Insert the probes of voltmeter to the back of the harness side of G-sensor connector 2 and 3.





2. Turn the ignition switch to ON and check the output voltage of G-sensor.
Standard value: 2.5V





3. Secure the G-sensor so that the arrow mark of the sensor mounting surface is facing straight down, and then check the output voltage between terminal 2 and 3.
Standard value: 3.5V
4. In the case that the voltage is outside the standard value, and there is no abnormality in power supply and ground wires, replace the G-sensor.