LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2004 >> XG350 Base >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System >> Mechanical Power Steering System >> Power Steering Gear Box >> Removal

Power Steering Gear Box: Removal

  1. Drain the power steering fluid.
  2. Remove the joint assembly connecting bolt.
    Fig 1: Disconnecting Steering Shaft Joint
    G00721888Courtesy of HYUNDAI MOTOR CO.
  3. Using the special tool (09568-31000), disconnect the tie rod end from the knuckle arm.
    Fig 2: Removing Tie Rod Ends From Knuckle Arm
    G00721889Courtesy of HYUNDAI MOTOR CO.
  4. Disconnect the front muffler temporarily.
    Fig 3: Disconnecting Front Muffler
    G00721890Courtesy of HYUNDAI MOTOR CO.
  5. Remove the connecting bolts of front and rear roll stopper.
    Fig 4: Removing Front & Rear Roll Stopper Bolts
    G00721891Courtesy of HYUNDAI MOTOR CO.
  6. Remove the mounting bolts (6 EA) of cross member complete assembly.
    Fig 5: Removing Cross Member Bolts
    G00721892Courtesy of HYUNDAI MOTOR CO.
  7. Disconnect the pressure hose and the return tube.
    Fig 6: Disconnection Power Steering Lines At Gear Box
    G00721893Courtesy of HYUNDAI MOTOR CO.
  8. Remove the steering gear box mounting bolts and remove the steering gear box assembly and the mounting rubber.
    CAUTION: When removing the gear box, pull it out carefully and slowly to avoid damaging the boots.
  9. Remove the stabilizer bar.
    Fig 7: Removing Stabilizer Bar
    G00721894Courtesy of HYUNDAI MOTOR CO.