LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2004 >> Accent Base >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System >> Mechanical Power Steering System >> Power Steering Oil Pump >> Reassembly

Power Steering Oil Pump: Reassembly

  1. After installing the O-ring to the connector, install the flow control spring, the flow control valve and the connector into the pump body.
    Fig 1: Installing Flow Control Spring & Flow Control Valve
    G00335973Courtesy of HYUNDAI MOTOR CO.
  2. Install the oil seal in the pump body by using the special tool.
    Fig 2: Installing Oil Seal In Pump Body
    G00335974Courtesy of HYUNDAI MOTOR CO.
  3. Install the pulley and shaft assembly to the oil pump body.
    Fig 3: Installing Pulley & Shaft Assembly To Oil Pump Body
    G00335975Courtesy of HYUNDAI MOTOR CO.
  4. Install the oil pump side plate and rotor.
    Fig 4: Installing Oil Pump Side Plate
    G00335976Courtesy of HYUNDAI MOTOR CO.
  5. After inserting the lock pin into the groove of the front housing, install the cam ring attending to the direction.
    Fig 5: After Inserting Lock Pin Into Groove Of Front Housing
    G00335977Courtesy of HYUNDAI MOTOR CO.
  6. Install the rotor.
  7. Install vanes so that the rounded edges face outward.
    Fig 6: Installing Vanes So That Rounded Edges Face Outward
    G00335978Courtesy of HYUNDAI MOTOR CO.
  8. Install the shaft fixing clip with snap ring pliers.
    Fig 7: Installing Shaft Fixing Clip With Snap Ring Pliers
    G00335979Courtesy of HYUNDAI MOTOR CO.
  9. Install the O-ring and oil pump cover assembly.
    Fig 8: Installing O-Ring & Oil Pump Cover Assembly
    G00335980Courtesy of HYUNDAI MOTOR CO.
  10. Install the suction pipe and O-ring.
    Fig 9: Installing Suction Pipe & O-Ring
    G00335981Courtesy of HYUNDAI MOTOR CO.