LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2004 >> Accent Base >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System >> Mechanical Power Steering System >> Power Steering Oil Pump >> Installation

Power Steering Oil Pump: Installation

  1. After installing the oil pump to the oil pump bracket, install the "V" belt and tighten the bolt adjusting tension to the specified torque.

    Standard value 

    Oil pump adjusting bolt: 25~33 Nm (250~330 kg.cm, 18~24 lb.ft)

    Fig 1: Locating "V" Belt Adjusting Bolt
    G00335982Courtesy of HYUNDAI MOTOR CO.
  2. Install the suction hose.
    CAUTION: Install the pressure hose to the oil pump, facing the painted part on the hose toward the oil pump.
  3. Install the pressure hose to the oil pump.
    NOTE: Install the pressure hose being careful so that it does not twist and come in contact with other components.
    Fig 2: Locating Oil Pump Pressure Hose
    G00335983Courtesy of HYUNDAI MOTOR CO.
  4. Add power steering fluid (PSF-3).
  5. Air bleed the system.
  6. Check the oil pump pressure.