LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2004 >> Accent Base >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System >> Mechanical Power Steering System >> Power Steering Gear Box >> Removal

Power Steering Gear Box: Removal

  1. Support the specified portion of the vehicle with a lift.
  2. Drain the power steering fluid.
  3. Remove the front tires (RH/LH).
  4. After removing the split pin, disconnect the tie rod from the knuckle by using the special tool.
    Fig 1: Disconnecting Tie Rod From Knuckle By Using Special Tool
    G00335890Courtesy of HYUNDAI MOTOR CO.
  5. Disconnect the steering shaft assembly from the gear box inside the passenger compartment.
    Fig 2: Disconnecting Steering Shaft Assembly From Gear Box Inside Passenger Compartment
    G00335891Courtesy of HYUNDAI MOTOR CO.
  6. Raise up the vehicle.
  7. Loosen the power steering pressure tube mounting clamp and return tube mounting clamp mounting bolt.
    Fig 3: Loosening Power Steering Pressure Tube Mounting Clamp & Return Tube Mounting Clamp Mounting Bolt
    G00335893Courtesy of HYUNDAI MOTOR CO.
  8. Disconnect the pressure tube and return tube fitting from the power steering gear box.
    Fig 4: Disconnecting Pressure Tube & Return Tube Fitting From Power Steering Gear Box
    G00335894Courtesy of HYUNDAI MOTOR CO.
  9. Remove the power steering gear box mounting bolt and clamp.
    Fig 5: Removing Power Steering Gear Box Mounting Bolt & Clamp
    G00335895Courtesy of HYUNDAI MOTOR CO.
  10. Separate the power steering gear box assembly by pulling it toward the rights side of the vehicle.
Fig 6: Separating Power Steering Gear Box Assembly By Pulling It Toward Rights Side Of Vehicle
G00335896Courtesy of HYUNDAI MOTOR CO.