Manual Steering Gear Box: Removal
- Support the specified point of the vehicle with a lift.
Courtesy of HYUNDAI MOTOR CO.
- Remove the front tires (RH/LH).
- After removing the split pin, disconnect the tie rod from the knuckle by using the special tool.
Courtesy of HYUNDAI MOTOR CO.
- Disconnect the shaft assembly from the gear box inside the passenger compartment.
Courtesy of HYUNDAI MOTOR CO.
- Raise up the vehicle.
- Remove the manual steering gear box mounting bolt and clamp.
Courtesy of HYUNDAI MOTOR CO.
- Separate the manual steering gear box assembly by pulling it toward the right side of the vehicle.
Courtesy of HYUNDAI MOTOR CO.