LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2003 >> Sonata GLS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Automatic Transaxle System) >> Automatic Transaxle System >> Shift Lever >> Installation >> Procedure To Install The Lock Cam

Procedure To Install The Lock Cam

WARNING: This page is about a different variant/trim than selected.
Fig 1: Identifying Shift Lever Positions
G00963965Courtesy of HYUNDAI MOTOR CO.
  1. Move A/T lever to "P" position to set the key lock cam and the shift lock cam as shown in the figure.
    • Check that the key lock cam is located at "B" by the detent pin.
    • Check that the shift lock cam is located at "A".
    Fig 2: Setting Lock Cam & Shift Lock Cam
    G00963966Courtesy of HYUNDAI MOTOR CO.
  2. Check that the key cylinder is at "LOCK".