LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2000 >> Sonata Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics - 2.4L >> Diagnostic Tests >> DTC P0421: Catalyst Efficiency Below Threshold >> Test Procedures

Test Procedures

  1. Turn ignition on. Connect scan tool to data link connector and verify DTC P0421 is set. If DTC P0130, P0135, P0136 and/or P0141 is also set, repair these DTCs first. If only DTC P0421 is set, go to next step.
  2. Start engine and allow to idle. Inspect for exhaust leakage around front HO2S, rear HO2S and before and after catalytic converter. If no leaks are found, go to next step. If leaks are found, repair as necessary. When repairs are completed, clear DTCs and verify operation.
  3. Check rear HO2S. See DTC P0136: REAR HEATED OXYGEN SENSOR (HO2S) CIRCUIT MALFUNCTION  . Replace rear HO2S as necessary. When repairs are completed, clear DTCs and verify operation. If rear HO2S is okay, go to next step.
  4. Turn ignition off. Replace catalytic converter. When repairs are completed, clear DTCs and verify DTC P0421 does not reset. If DTC P0421 resets, verify ECM connector is clean and tight. If connector is okay, replace ECM. When repairs are completed, clear DTCs and verify operation.