LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2000 >> Sonata Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics - 2.4L >> Diagnostic Tests >> DTC P0400: EGR Flow Malfunction >> Test Procedures

Test Procedures

  1. Turn ignition on. Connect scan tool to data link connector and verify DTC P0400 is set. If DTC P0403 is not also present, go to next step. If DTC P0403 is also present, repair DTC P0403 first. See DTC P0403: EGR SOLENOID MALFUNCTION  .
  2. Start engine and allow to idle. Check EGR valve vacuum hoses for leaks and clogs. If no leaks or clogs are found, go to next step. If leaks are clogs are found, repair as necessary. When repairs are completed, clear DTCs and verify DTC P0400 does not reappear.
  3. Check EGR valve and EGR tube for clogging. If no clogging is found, go to next step. If clogging is found, clean or replace components as necessary. When repairs are completed, clear DTCs and verify DTC P0400 does not reappear.
  4. Verify ECM connector is clean and tight. If connector is okay, replace EGR solenoid valve. When repairs are completed, clear DTCs and verify DTC P0400 does not reappear. If problem persists, replace ECM.