LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 1996 >> Accent Base, 2D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Instrument Panel) >> Component Testing >> Speedometer >> Reed Switch

Reed Switch

WARNING: This page is about a different car, the 1995 Hyundai Accent. However, it is still accessible from the selected car via links, so may be relevant.

Remove instrument cluster. See INSTRUMENT CLUSTER  under REMOVAL & INSTALLATION. Using ohmmeter, check continuity between reed switch terminals while rotating speedometer cable. Ohmmeter reading should alternate between continuity and no continuity as cable is rotated.

SPEEDOMETER TEST (1)

Speed (MPH) (2) Acceptable Range (MPH)
10 10-12.5
20 20-22.5
40 40-43.2
60 60-63.5
80 80 To 84.5
100 100 To 105.5
120 120 To 126.5
(1) Excessive tire wear and incorrect tire inflation pressure can cause incorrect speedometer indication.
(2) Speed indicated on speedometer tester.