LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 1996 >> Accent Base, 2D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Instrument Panel) >> Component Testing >> Hazard Warning Switch

Hazard Warning Switch

WARNING: This page is about a different car, the 1995 Hyundai Accent. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cable. Remove hazard switch from center trim panel. Disconnect hazard switch harness connector. Using ohmmeter, check continuity in each switch position, between indicated switch terminals. See HAZARD WARNING SWITCH TEST  . SeeFig 1 . Replace switch if continuity is not as specified.

HAZARD WARNING SWITCH TEST

Switch Position (1) Continuity Between Terminal
Off 7 & 10
On 2 & 3; 4, 5, 6 & 9
(1) Terminals No. 2 and 3 are for illumination circuit.
Fig 1: Hazard Switch Harness Connector Terminals
G96D06225Courtesy of HYUNDAI MOTOR CO.