LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 1995 >> Sonata V6-3.0L >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Exhaust Gas Recirculation >> EGR Control Solenoid >> Testing and Inspection

EGR Control Solenoid: Testing and Inspection





1. Disconnect the vacuum hose (green stripe) from the solenoid valve and connect a hand vacuum pump to the fitting.
2. Disconnect the electrical connector.





3. Apply battery voltage to the electrical connectors as shown.
4. Apply vacuum to the solenoid with a pump and note the results.

Vacuum should hold when voltage is applied.
Vacuum should NOT hold when voltage is removed.


EGR Resistance Test:




5. Using an ohm meter check the resistance across the solenoid terminals.

Resistance: 36 - 44 ohms at 20°C (68°F)