Installation Procedure
- Install the steering column tilt head housing (1) to the steering column.
- Using the tilt lever, position the lock shoes to the dowel pins (2).
- Rotate the steering column tilt head (1) in order to align the holes for the steering column pivot pins.
- Install the 2 new steering column pivot pins by performing the following steps:
- Lubricate the steering column pivot pins (1) with, GM P/N 12346293 (Canadian P/N 992723)
- Press the steering column pivot pins (1) until the they are firmly seated.
- Stake the steering column pivot pins at three new locations (1).
- Install the tilt spring. Refer to Tilt Spring Replacement
- Install the ignition lock cylinder case. Refer to Ignition Lock Cylinder Case Replacement
- Install the steering column into the vehicle. Refer to Steering Column Replacement