LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2021 >> Pilot EX, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle - Service Information >> Disassembly and Reassembly >> Transfer Assembly Disassembly and Reassembly (9-Speed A/T) >> Disassembly >> Procedure

Transfer Assembly Disassembly and Reassembly (9-Speed A/T): Disassembly: Procedure

NOTE: Numbered call-outs in figure pertain to list numbers in following procedure
Fig 1: Exploded View Of Transfer Assembly Replacement Components
GHH304382Courtesy of HONDA, U.S.A., INC.
Detailed information, notes, and precautions
Torque: Nm (kgf-m, lbf.ft)
Replace
  1. Transfer Cover - Remove
  2. Transfer Cover Oil Seal - Remove
    GHH304383Courtesy of HONDA, U.S.A., INC.
  3. Transfer Hypoid Drive Gear/Shaft Assembly - Remove
  4. Breather Hose Bracket - Remove
  5. Breather Plate - Remove
  6. Oil Gutter - Remove
  7. Companion Flange Locknut - Remove
    GHH304384Courtesy of HONDA, U.S.A., INC.
    1. Using a chisel, cut the lock tab (A) of the locknut (B).
    GHH304385Courtesy of HONDA, U.S.A., INC.
    2. Secure the transfer housing (A) in a bench vise (B) with wood blocks.
    NOTE:

    To prevent damaging the transfer housing, always use wood blocks or equivalent materials between the transfer housing and the bench vise.

    3. Install the companion holder on the companion flange.

    4. Loosen the locknut.

    5. Remove the companion holder.

  8. Conical Spring Washer - Remove
  9. Back-Up Ring - Remove
  10. Companion Flange - Remove
  11. Transfer Output Shaft (Hypoid Gear) - Remove
  12. Transfer Spacer - Remove
  13. Thrust Washer - Remove
  14. Transfer Oil Seal - Remove