LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2016 >> Odyssey EX >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Block >> Connecting Rod Bearing Replacement >> Connecting Rod Bearing Selection >> Big End Bore Code Locations

Big End Bore Code Locations

Numbers or bars have been stamped on the side of each connecting rod as a code for the size of the big end. Use them, and the letters or bars stamped on the crank (codes for rod journal size), to choose the correct bearings. If the codes are indecipherable because of an accumulation of dirt and dust, do not scrub them with a wire brush or scraper. Clean them only with solvent or detergent.

Fig 1: Identifying Big End Bore Code
G06966435Courtesy of AMERICAN HONDA MOTOR CO., INC.
Fig 2: Bearing Identification Reference Chart
G06966436Courtesy of AMERICAN HONDA MOTOR CO., INC.

Connecting Rod Journal Code Locations (Letters or Bars) 

Fig 3: Connecting Rod Journal Code
G06966437Courtesy of AMERICAN HONDA MOTOR CO., INC.