LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2016 >> Civic EX >> Repair and Diagnosis >> Brakes >> Traction Control >> VSA System - DTC Diagnostics >> DTC Troubleshooting >> DTC U0401-68 (VSA Control Unit)

DTC U0401-68 (VSA Control Unit)

DTC U0401-68  : ECM Failure

NOTE: 

DTC Description DTC Freeze Frame
U0401-68 ECM Failure    

DTCs (VSA)

  1. Problem verification

    -1. Turn the vehicle to the ON mode.

    -2. Clear the DTC with the HDS.

    -3. Turn the vehicle to the OFF (LOCK) mode.

    -4. Test-drive the vehicle at 6 mph (10 km/h) or more.

    NOTE:  Drive the vehicle on the road, not on a lift.

    -5. Check for DTCs with the HDS.

    DTC Description DTC Freeze Frame
    U0401-68 ECM Failure    

    Is DTC U0401-68 indicated?

    YES 

    The failure is duplicated. Go to step 2.

    NO 

    Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting . If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the Freeze data/on-board snapshot.

  2. PGM-FI system DTCs check

    -1. Check for PGM-FI system DTCs with the HDS.

    DTC Description Confirmed DTC Pending DTC
         

    Are any DTCs indicated?

    YES 

    Go to indicated DTCs troubleshooting. After all PGM-FI system DTC's have been repaired, return to VSA and clear this code.

    NO 

    Go to step 3.

  3. PCM check (substitution)

    -1. Substitute a known-good PCM .

    -2. Clear the DTC with the HDS.

    -3. Turn the vehicle to the OFF (LOCK) mode.

    -4. Test-drive the vehicle at 6 mph (10 km/h) or more.

    NOTE:  Drive the vehicle on the road, not on a lift.

    -5. Check for DTCs with the HDS.

    DTC Description DTC Freeze Frame
    U0401-68 ECM Failure    

    Is DTC U0401-68 indicated?

    YES 

    Check for loose terminals and poor connections in the VSA modulator-control unit 46P connector. Check for any authorized service information related to the DTCs or symptoms you are troubleshooting. If they are OK, replace the VSA modulator-control unit .

    NO 

    Replace the original PCM .