LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2016 >> Civic EX >> Repair and Diagnosis >> Brakes >> Traction Control >> VSA System - DTC Diagnostics >> DTC Troubleshooting >> DTC C0051-54 (VSA Control Unit)

DTC C0051-54 (VSA Control Unit)

DTC C0051-54  : Steering Angle Neutral Position Learning Incomplete

NOTE: Before you troubleshoot, review the general troubleshooting information .

DTC Description DTC Freeze Frame
C0051-54 Steering Angle Neutral Position Learning Incomplete    

DTCs (VSA)

  1. EPS system DTCs check

    -1. Turn the vehicle to the ON mode.

    -2. Check for EPS system DTCs with the HDS.

    DTC Description DTC Freeze Frame
         

    Are any DTCs indicated?

    YES 

    Go to indicated DTCs troubleshooting.

    NO 

    Go to step 2.

  2. DTC check

    -1. Clear the DTC with the HDS.

    -2. Turn the vehicle to the OFF (LOCK) mode.

    -3. Test-drive the vehicle at 31 mph (50 km/h) or more.

    NOTE:  Drive the vehicle on the road, not on a lift.

    -4. Check for DTCs with the HDS.

    DTC Description DTC Freeze Frame
    C0051-54 Steering Angle Neutral Position Learning Incomplete    

    Is DTC C0051-54 indicated?

    YES 

    The failure is duplicated. Go to step 3.

    NO 

    Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting . If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the Freeze data/on-board snapshot.

  3. VSA sensor neutral position memorization check

    -1. Do the VSA sensor neutral position memorization .

    -2. Turn the vehicle to the OFF (LOCK) mode.

    -3. Test-drive the vehicle at 31 mph (50 km/h) or more.

    NOTE:  Drive the vehicle on the road, not on a lift.

    -4. Check for DTCs with the HDS.

    DTC Description DTC Freeze Frame
    C0051-54 Steering Angle Neutral Position Learning Incomplete    

    Is DTC C0051-54 indicated?

    YES 

    Check for loose terminals and poor connections in the VSA modulator-control unit 46P connector. Check for any authorized service information related to the DTCs or symptoms you are troubleshooting. If they are OK, replace the VSA modulator-control unit .

    NO 

    Troubleshooting is complete.