LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2016 >> Civic EX >> Repair and Diagnosis >> Brakes >> Traction Control >> VSA System - DTC Diagnostics >> DTC Troubleshooting >> DTC B0050-F0 (VSA Control Unit)

DTC B0050-F0 (VSA Control Unit)

DTC B0050-F0  : Driver's Seat Belt Buckle Switch Malfunction

NOTE: Before you troubleshoot, review the general troubleshooting information .

DTC Description DTC Freeze Frame
B0050-F0 Driver's Seat Belt Buckle Switch Malfunction    

DTCs (VSA)

  1. SRS DTCs check

    -1. Turn the vehicle to the ON mode.

    -2. Check for SRS DTCs with the HDS.

    DTC Description DTC
       

    Are any DTCs indicated?

    YES 

    Go to indicated DTCs troubleshooting.

    NO 

    Go to step 2.

  2. Problem verification

    -1. Clear the DTC with the HDS.

    -2. Turn the vehicle to the OFF (LOCK) mode, then to the ON mode.

    -3. Check for DTCs with the HDS.

    DTC Description DTC Freeze Frame
    B0050-F0 Driver's Seat Belt Buckle Switch Malfunction    

    Is DTC B0050-F0 indicated?

    YES 

    Check for loose terminals and poor connections in the VSA modulator-control unit 46P connector. Check for any authorized service information related to the DTCs or symptoms you are troubleshooting. If they are OK, replace the VSA modulator-control unit .

    NO 

    Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting . If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the Freeze data/on-board snapshot.