LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2014 >> Pilot LX, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Torque Converter Housing >> Countershaft Bearing Replacement

Countershaft Bearing Replacement

Special Tools Required 

  1. Remove the countershaft bearing from the torque converter housing using the 25-40 mm adjustable bearing puller and a commercially available 3/8"-16 slide hammer (A).
    Fig 1: Removing Countershaft Bearing From Torque Converter Housing Using Adjustable Bearing Puller
    G08087498Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Install the ATF guide plate (A) into the torque converter housing, then install a new bearing (B) in the direction shown.
    Fig 2: Identifying ATF Guide Plate And Bearing
    G08087499Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the bearing (A) in the torque converter housing using the driver handle and the 78 x 80 mm bearing driver attachment; install the bearing outer notch-cut (B) to a depth (C) of 0-0.03 mm (0-0.001 in) below the torque converter housing surface (D).
    Fig 3: Installing Bearing In Torque Converter Housing Using Driver Handle
    G08087500Courtesy of AMERICAN HONDA MOTOR CO., INC.